The second generation of the Eurocodes affects almost every aspect of structural design. Load combinations are changing, new resistance models are being introduced in several areas, and the provisions for assessing existing structures are being expanded. It is worth starting preparations for the transition now. We also need to review our established calculation procedures and design aids.

Symbols representing the second-generation Eurocode families.
© European Union, 2021, JRC. CC BY 4.0. Image source.
When will the transition take place?
The European implementation schedule sets two key deadlines:
- 30 September 2027 is the deadline for national implementation of the second-generation Eurocodes.
- 30 March 2028 is the deadline for withdrawing first-generation standards that conflict with the new editions.
National implementation means publishing or endorsing a European standard as a national standard. In Hungary, the process is already well advanced: according to the August 2026 update from the Hungarian Standards Institution (MSZT), the second-generation suite has already been published as national standards, apart from a few supplementary parts relating to steel structures. Source: MSZT
Why was a new generation needed?
Extensive experience has been gained from applying the first-generation Eurocodes, while construction materials, structural solutions and calculation methods have continued to evolve. The revision aims to incorporate these developments, improve consistency between the different parts of the standards and make them easier to use in practice.
Greater emphasis is placed on assessing existing structures and on recycling, as well as on structural resistance to the spread of local damage, known as structural robustness. The scope of the standards is also expanding to cover new materials and structural types. The main developments in the JRC overview
What are the most significant changes?
The following areas deserve particular attention in day-to-day design:
- Basis of design and load combinations – EN 1990. The framework for ultimate limit state verifications is changing, with the introduction of verification cases VC1–VC4. This also affects the selection of partial factors and the appropriate combination, particularly for equilibrium and geotechnical verifications.
- Loads and environmental actions – EN 1991. Some snow load shape coefficients and snow accumulation models are changing, with particular attention given to flat roofs fitted with solar panels. The rules for determining wind actions are being expanded, and a separate part addresses atmospheric icing.
- Reinforced concrete structures – EN 1992. New models are being introduced for verifying members without shear reinforcement and for punching shear. Crack width calculations are being revised, along with the rules for determining deflection, durability and concrete cover.
- Steel structures – EN 1993. The scope of the general rules is being extended to steel grades up to S700, and some stability verifications are changing. Design assisted by finite element analysis is covered in a dedicated part, EN 1993-1-14.
- Timber structures – EN 1995. Design provisions for modern timber products, including CLT, and for connections are being expanded. A more detailed framework is provided for timber floor vibration checks and fire resistance design.
- Geotechnical design – EN 1997. The suite is being reorganised into three parts and aligned more closely with the verification framework of EN 1990. Greater emphasis is placed on documenting the ground model, the design model and the parameters adopted.
- Earthquake-resistant design – EN 1998. Changes affect the definition of the response spectrum, ductility classes and the behaviour factor framework. Displacement-based design is gaining a greater role alongside force-based methods.
How should we prepare?
We should start by reviewing the changes to the parts of the standards we use most frequently in our own design practice. This will help us update our calculation templates, software settings and documentation templates.
Comparative calculations for a few familiar structures can also be helpful. The differences can show us which new requirements or models affect the results. The impact of the second generation varies between structures: the direction and magnitude of any expected change must always be assessed for the specific design task.