STRUCTURAL ANALYSIS & DESIGN
STRUCTURAL ANALYSIS & DESIGN SOFTWARE
AxisVM Features

AxisVM Export Formats

AxisVM Export IFC 2x, 2x2, 2x3 file

AxisVM Export IFC 2x, 2x2, 2x3 file

Exports an IFC file describing the model with achitectural objects (walls, slabs, columns, beams). IFC files can be imported in ArchiCAD, AutoDesk ADT, Revit, Nemetscheck Allplan, Tekla-Xsteel and other architectural programs. If the Architectural model option is selected only architectural objects will be exported. If Static model is selected, finite element meshes, loads, load cases, load groups and load combinations will be included in the IFC file. Dynamic, influence line or moving loads will be excluded.
See details BIM Collaboration

AxisVM Export DXF file

AxisVM Export DXF file

Saves the geometry of the model to a DXF file format for use in other CAD programs. The geometry is saved with actual dimensions, in a Modelname.DXF file. Selecting this menu command will bring up the Export DXF dialog box, that lets you specify the units of measurement in the exported file. Three different formats are available for DXF output.
- AutoCAD 2000 DXF file,
- AutoCAD R12 DXF file,
- AutoCAD reinforcement design file.

AxisVM Export Tekla Structures file

AxisVM Export Tekla Structures file

Two different file formats are available:
Tekla (TS) Structures ASCII file (*.asc) Saves the geometry of the model into a file format that is recognized by Tekla Structures. The file includes the coordinates of i and j-end nodes, the cross-sectional properties and the reference point of truss and beam elements.
Tekla (TS) DSTV file (*.stp) Saves the data of the truss and beam elements (endpoints, material, cross section, reference) as a standard DSTV file. This file format is supported by several steel designer CAD software.
See details Tekla Structures Collaboration

AxisVM Export Bocad file

AxisVM Export Bocad file

Saves the geometry of the model into a file format that is recognized by the Bocad software. The file includes the coordinates of i and j-end nodes, the cross-sectional properties and the reference point of truss and beam elements.

AxisVM Export StatikPlan file

AxisVM Export StatikPlan file

For StatikPlan AxisVM exports a DXF file including the contour of the reinforced concrete plate, the calculated reinforcements as isolines and the result legends on different layers.

AxisVM Export PianoCA file

AxisVM Export PianoCA file

Generates a *.pia interface file for PianoCA. It includes the data, supports, loads and the calculated results of the selected beam elements.

AxisVM Export CADWork file

AxisVM Export CADWork file

Creates a DXF file to use in CADWork reinforcement detailing software. Only selected domains will be exported. As CADWork works in 2D, selected domains must be in the same plane. Each domain in the DXF file is transformed to a local X-Y coordinate system, Z coordinate represents the calculated amount of reinforcement.

AxisVM Export Nemetschek AllPlan

AxisVM Export Nemetschek AllPlan

Exports reinforcement of all active domains into separate files (filename_001.asf…) which can be later imported to Nemetschek Allplan in batch mode (at once). Due to import limitations of Allplan, domains are transformed to XY or XZ plane whichever plane is closer to the exported domain. Only reinforcement of domains are exported, results of individually defined surface elements will be ignored. Three reinforcement values are exported for triangular mesh elements and four values for quadrangles. Select Move To Origin to move exported domains to the origin (outline polygon node closest to the origin will be justified to the origin). Select what type of reinforcement to export: required (calculated), actual (applied) or the maximum of both.

AxisVM Export SDNF 2.0, 3.0 file

AxisVM Export SDNF 2.0, 3.0 file

Saves the model in SDNF (Steel Detailing Neutral Format) file readable by steel detailing products (Advance Steel, SDS/2, Tekla Structures, PDMS).

AxisVM Viewer file

AxisVM Viewer file

Saves the model in AxisVM Viewer format (*.axv).
See details AxisVM Viewer

AxisVM *.axs file

AxisVM *.axs file

The following groups of elements can be exported: the entire structure, displayed parts or selected elements. To select export options similar to those of the Copy options click the Settings button of the Export dialog.


Concrete design and check
Steel design and check
Timber beam design

AxisVM Overview
AxisVM Rapido Overview
AxisVM Viewer Overview
Concrete design and check
Steel design and check
Timber beam design
Step by Step book
AxisVM Movies
Customer Support

Copyright (c) InterCAD All rights reserved | Design by ConSoft

Contact your Reseller
Request for Quotation